Home PR electronics PR7501: HART temperature transmitter สำหรับงานที่เน้นความปลอดภัยและแม่นยำ
PR7501: HART temperature transmitter สำหรับงานที่เน้นความปลอดภัยและแม่นยำ PDF Print E-mail
Written by Administrator   
Wednesday, 08 March 2017 15:39

image

image

LNG filling systems

Both LNG and LCNG filling stations are becoming more common due to the benefits offered in using this alternative fuel for vehicles, especially commercial vehicles.

image

 

Industrial Hot Water Systems

Industrial hot water systems are used in various industries to supply both process water supplies and indirect heating requirements

image

 

Stack flare monitoring

Flares are used in many industrial processes for the burning off of flammable gas from pressure relief valves or from process diversions due to maintenance or start-up procedures,

image 

 

Flow Compensation

Accurate flow measurement systems must be able compensate for the effects of temperature and pressure on measured medium which can cause changes in volume and density.

image

Wet/Dry Seal Support Systems

These systems regulate gas/fluid flow and pressure to wet/dry seals, and monitor seal performance and provide leak detection control.


image

Heat Exchangers

A heat exchanger is a device that allows heat from a fluid (a liquid or a gas) to pass to a second fluid (another liquid or gas) without the two fluids having to mix together or come into direct contact.

image

Reactor Vessels (Bioreactor/Chemical Reactor)

These types of reactors are used to maintain a biological activity level eg aerobic or anaerobic process or to initiate and maintain efficiency of chemical reactions. Other processes include solids dissolution, mixing, distillation and crystallisation.
image

 

Cryogenic Air Separation

A process used in majority of modern bulk gas production plants to separate the various gases from air including Argon, Nitrogen etc

image

 

SIP – Steam in Place

Steam-in-place (SIP) cleaning uses the thermal energy of condensing steam for a controlled time to clean and disinfect the interior surfaces of bioreactors, vessels, tanks, piping, filters, and associated fittings "in place," without costly removal or disassembly of critical production lines.

image


>> รายละเอียดของแต่ละApplication

The 7501 features:

• 60 mm backlit dot matrix display with radial bar graph
• Optical buttons that work in even harsh environments
• Fast and intuitive guided programming
• HART 7 functionality with HART 5 compatibility
• RTD, TC, Ohm and bipolar mV inputs and analog output

Once installed, you never have to open the housing again. The enclosure is Ex d explosion proof / flame proof to maintain safety and integrity at all times.

Easy configuration and operation

The 7501 Field mounted HART temperature transmitter can be mounted in 3 ways: on the temperature sensor, on a pipe, or on a bulkhead.

Configuration is easy and logical with scrolling help texts and three logical buttons: up arrow, down arrow and OK.

Thanks to the user-friendly PR Menu Guide, it is possible to configure the device in less than 1 minute.

The field display is equipped with many hazardous area and marine approvals for applications worldwide.

 

Get a quick introduction to the PR 7501 – watch the video:

7501 Folder En
> Download the brochure | คู่มือการใช้งาน | See product data sheet

Last Updated ( Wednesday, 08 March 2017 08:51 )
 

สิ่งที่น่าสนใจ

RS-422/RS-485 Surge Protector หลากหลายแบบ